The thickness of the body walls has been optimized to reduce its weight to a minimum (380 g). A semi-flexible elastomer coating protects the first stage from knocks and erosion. High pressure valve seat in stainless steel AISI316 Besides the possibility of replacement during maintenance, if there are signs of deterioration, the composition of the valve seat, much harder than the traditional brass of the fixed valve seats, prolongs its life thanks a better resistance to the deforming action of the metal particles that can infiltrate the cylinder.Polyurethane valve with high mechanical resistance to oils and hyper-toxic mixtures. The hyper-balance of the mechanism ensures a slight increase in the intermediate pressure as the tank pressure decreases. As a result, the regulator provides the highest level of performance in the final phase of the dive, undoubtedly the most critical. An advanced study of the internal air circulation and an exclusive distribution chamber that channels the air volume directly to the low pressure outlets allow to minimize the pressure drop in forced breathing (0.5 bar), ensuring high performance in any situation. Insulated sealed chamber (Sealed Chamber, SC) insulation and antifreeze kit that completely isolates the membrane and the spring from contact with water, making them suitable for operation in extremely low temperature conditions and in very dirty water.
Particularly effective conical filter that fits without the need for an elastic ring. 2 high pressure and 4 low pressure outputs. Supplied in version INT (a brida) and DIN 300 bar. The thread of the DIN version was made of stainless steel instead of brass to ensure greater resistance in the event of falls or impacts. SECOND STAGE XS COMPACT: New ultra-simplified second stage single-casing in acrylonitrile-butadiene-styrene (ABS) + elastomer, very small in size (6 cm in diameter), super light (145 g) with a construction mechanism designed to obtain the minimum number of components and a great robustness.
The specific calibration of the inhalation mechanism changes slightly the personality of the air supply compared to the Ellipse series, providing, in addition to the extraordinary sensitivity of these models, a high flow rate without the need for a venturi effect too accentuated. However, the performance results place it above dispensers considered to be of higher range. Asymmetric drilling of the front cover.The water flow begins to push the membrane counterclockwise so that its retraction is produced perfectly flat and the lever is lowered progressively and completely perpendicular regardless of the conditions current, sudden movements, any position of the face, etc. Especially reduced exhalation effort without the need to decrease the thickness of the membrane. The design of the membrane retention system channels the flow to the whiskers holes at 100% using a powerful Venturi effect which also helps to direct the bubbles away from the diver's field of vision.
Membrane fixed in order to avoid water infiltration in case of sudden rotations or when entering the water from the boat. Purge button, practically integral, of size from 80 to 400% greater than any other dispenser on the market to facilitate the maneuver of emptying, especially in the case of inexperienced divers.Lid assembly system by 30º bayonet turn, to ensure easy and safe assembly and disassembly, even in the case of sand cleaning operations performed on the beach, without the need for tools. Reduced wear thanks to the finish of the casing, obtained through the application of a new technology during the molding that allows to obtain a grainy appearance based on a microstructure of rounded profiles. The Octopus Compact uses the same technopolymer case as all the 2nd stages of the Compact models, with the only difference being the yellow front cover. Even the whip is the same color and has a longer length (100 cm against the standard 76 cm). Downstream system Venturi adjustable Patented reduced friction lever Full-width purge button Anti-skretch finish Bayonet cap opening Removable technopolymer whisker Whip coated in super light and flexible technopolymer: 153 gr.
APPROVAL Annex B EN 250: 2014 A> 10 ° C. Photos and descriptions are owned and are powered by Grafica2007. The item "LO3 11 Cressi Regulator MC9 YOKE COMPACT PINK + OCTOPUS COMPACT YELLOW" is in sale since Wednesday, March 21, 2018. This item is in the category "Sporting Goods\Scuba & Snorkelling\Regulators".The seller is "talassasport" and is located in ROMA. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.